Industrial Panel Accessories Catalog

Snap-on IP54 and IP55 filter fans with washable synthetic fiber filter mats. High airflow ball-bearing fans prevent internal heat build-up around VFDs and power supplies.

Door-mount and side-mount closed-loop cooling units maintaining 25°C-35°C inside sealed IP55 enclosures. Essential for humid, dusty chemical/textile plants to prevent drive tripping.

PTC anodized aluminium semiconductor heaters with mechanical and electronic thermostats. Automatically activates during rainy season or nighttime drops to prevent moisture condensation on busbars.

Compact high-lumen magnetic or screw-mounted LED panel lights with integrated door limit switches. Automatically lights up the internal panel when maintenance doors are opened.

Flame-retardant virgin PVC slotted wire trunking ducts with non-slip snap lids. Along with 35mm zinc-plated standard and deep slotted DIN rails for robust component snap-mounting.

Complete selection of feed-through terminal blocks: screw clamp, spring clamp, push-in (PT), knife disconnect test terminals, and fuse terminals with blown fuse LED indicators.

Heavy-duty electro-tinned electrolytic copper tube lugs (Ring, Fork, Pin, Bootlace ferrules). Plus brass double-compression and single-compression cable glands for armored/unarmored cables.

Panel-mount Class 1.0 and 0.5s digital multifunction meters. Measures V, I, Hz, PF, Active kW, Reactive kVAR, Apparent kVA, and individual Harmonic Distortion with RS485 Modbus RTU communication.

Resin cast and tape wound measuring & protection Current Transformers (CTs) and Potential Transformers (PTs). Also available in split-core design for retrofitting onto live cables without cutting.

IP65 22.5mm modular push buttons, key selector switches, emergency stop mushroom buttons (twist-to-release), and multi-colored ultra-bright LED cluster pilot lamps (R, Y, B, G, A, W).

High linearity copper and aluminium wound series detuned filter reactors for APFC panels. De-tunes capacitor circuits to 189Hz (7%) or 134Hz (14%) to eliminate harmonic resonance and fire risks.

Heavy-duty wire-wound, aluminium clad, and perforated cage Dynamic Braking Resistors (DBR). Absorbs and dissipates regenerative voltage spikes when AC drives decelerate heavy loads rapidly.

Sheet Moulding Compound (SMC) and Dough Moulding Compound (DMC) flame-retardant standoff insulators. Tested to withstand up to 65kA electrodynamic short-circuit forces without cracking.

DIN rail mounted Switched Mode Power Supplies (SMPS). Delivers clean, ripple-free 24V DC power to sensitive PLCs, HMIs, analog sensors, and communication cards with short-circuit and overload protection.

4, 8, and 16-channel 24VDC interposing relay modules with socketed relays, LED status indicators, and individual fuse protection. Plus 4-20mA to 0-10V analog galvanic isolators.